Automatic Mold Temperature Control Equipment

Features of Automatic Mold Temperature Control Equipment

1Hot medium liquid: water or oil convertibly.
The water or oil can be used as a hot medium liquid according to the needs of mold forming temperature. Its high selectivity is certain to bring in high economic efficiency.
2Vertical pump.
The flow of vertical pump can be always kept steady and its service life keeps long.
3Stainless medium tank.
This interior tank will not get rust for long term, which is sure to prevent from any blockade of pipes and keep long-term service of pump.
4Transparent water [oil] level viewer.
The transparent water [oil] level viewer can easily be used to view and inspect the quantity of medium liquid and be reminded to refill the medium liquid from time to time.
5Automatic alarming device.
While water [oil] shortage occurs in the container, this device will automatically light up and start alarming and cut off the electric power of heaters and pumps, thus to guarantee their safety.
6High-precision automatic temperature control.
The measure of temperature is very sensitive and accurate, little change of temperature helps to keep products both fine and delicate.
7Minimize products wastage.
The mold can reach the required temperature right at the beginning of operation, thus can obviously minimize products shortage. Maintain proper temperature.
Either in continuous operation or in temporary shutting down, moldforming temperature can always be kept proper to guarantee the best quality of products and further improve the forming process.
8Compact in size, light in weight.
Easy to install, convenient to operate, convenient to move and little room to occupy.
http://kassel.en.busytrade.com/

Model	Unit	KDDC-18	KDDC-36		KDDC-48		KDDM-18		KDDM-36		KDDM-48
Temp. Range	℃	Normal temperature 350℃
Temp. Control Accuracy	℃	PID±1℃
Power Supply		AC3∮380V(3Phase+Earth)
Heat Transfer Medium		Conducting Oil
Cooling Method		Indirect Cooling
Cooling Capacity		In (200℃) about 25,000 kcal/h
Expansion Tank Capacity	L	25		25		30		42		42	50
Heating Capacity	KW	9x2		12x2		20x2		18+18		24+24	40+40
Pump Power	KW	0.55		1.1		2.8		0.55+0.55		1.1+1.1	2.8+2.8
Pump Flow	L/MIN	35		60		100		35+35		60+60	100+100
Pump Pressure	Kg/CM2	5		5.5		6.8		5.0+5.0		5.5+5.5	6.8+6.8
Max. Power Consumption	KW	19		26		52		38		52	104
Special Function		Oil Return by Pump Reversal
Alarm Function		Open Phase /Oil Shortage/Overheating/Overload/Oil Overflow/Abnormal Heat Alarm
Cooling Water Pipe	INCH	1/2		1/2		1/2		3/4		3/4	3/4
Circulating Oil Pipe	INCH	3/4		3/4		1		3/4x2		3/4x2	1x2
Size(L x W x H)	MM	1250x420x1100		1250x420x1100		1450x500x1350		1350x550x1250		1350x550x1250	1435x600x1350